SpeedBox 3.0 for Bosch (incl. Gen4)

Reliable second-generation tuning chip for your electric bike with a Bosch motor.

The SpeedBox 3.0 chip deactivates the e-bike speed limiter. After installing the chip, you will be able to view real values such as maximum speed, average speed, daily mileage, and range.

HOW DOES SPEEDBOX 3.0 WORK?

You can activate the SpeedBox 3.0 chip on the e-bike display. After pressing the WALK button, the display will briefly show 9.9 km/h (6.2 mph), and from that moment on, you are no longer limited. You can ride at: 40 km/h, 50 km/h, or over 60 km/h.

To turn off the chip, press the WALK button again. The display shows 2.5 km/h (1.6 mph), and the 25 km/h speed limit will be turned back on. The e-bike will work just as it did before the chip was installed.

We are also prepared for e-bikes that do not have a classic control panel with a Walk button. In this case, simply use the button combination + - + - to activate SpeedBox. It can be deactivated in the same way.

Please note that operating such modified e-bikes on roads may be in contradiction with the legislation applicable in some countries. The manufacturer and/or distributor are not responsible for damages resulting from the use of SpeedBox products. The use of e-bikes equipped with SpeedBox is not permitted on public roads, cycle paths, or in public spaces. E-bikes equipped with SpeedBox may be used exclusively on private property and entirely at one's own risk. Using SpeedBox products may void your e-bike's warranty.

We recommend using additional protective gear (helmet, gloves...) to avoid injuries due to higher riding speeds.

PROPERTIES:

• Speed limiter: deactivated
• Display data: real values
• Compatible with motors: Bosch 4.0
• Activation via button: WALK / + - + -
• Compatible with SpeedBox App: no

INSTALLATION

To connect the SpeedBox chip to an e-bike, we use colored connectors equipped with a key for a correct connection, making the chip truly easy to install. You can download the instructions or watch videos that will guide you in installing SpeedBox. Removing the chip is as easy as installing it. If you have any connection problems, do not hesitate to contact us.

If you want SpeedBox on a new e-bike, you must first ride the bike for at least 1 kilometer.